MANURE SEPARATION
Designed for maximum exploitation of both solid and liquid separated fractions.
SEPARATORS FOR SLURRY AND DIGESTATE
- Stainless steel construction, for working with slurry
- Tungsten coating gives the steel spiral screw greater wear resistance and a longer life.
- A labyrinth device prevents liquid entering the gearbox, providing sealing between the screw and the gearbox and preventing its deterioration.
- Triangular mesh sieve Aisi-316, either standard or extra-reinforced prevents solid particles from clogging the sieve.
- Possibility of adapting prefiltration ramp, to increase its performance and reach 0,08mm filtration.
- Large hatch for internal inspection of the sieve.
- Floating sieve and centered on both sides allows perfect coupling with the spiral: greater performance and duration.
- Solid plug signal detector, stops the operation of the pump and the separator in case of non-compaction.
- Adjustable collar ensures maximum performances in case of change of % of solid material of the slurry.
- Front neck with hinge allows manipulation of thread and sieve for easy maintenance.
- Pressing gates with counterweights, which regulate the percentage of dry matter at all times.
RAMPS. KOMPACK SYSTEMS.
- Up to 4 prefiltering ramp helps to remove up to 60% of the liquid with almost no energy cost.
- The separator is fed with more homogenous slurry, helping the separator to work properly
SEPARATION ADVANTAGES:
- No more smell for separated slurry
- Volume reduction
- The liquid fraction can be separated up to 0,75 - 0,50 - 0,25 - 0,08 mm (using the vibrant system - ramps
- Up to 30-40% dry matter in solid fraction
- Solid fraction is valued, can be transported and easy to stock.
- Solid fraction can be transformed into material for cow bedding
